Guide to setup i-device with Radwin Island
This guide is for use with iPhone 4 or 4S and iPod Touch 4th generation. Make sure that your device and computer are connected to the same WiFi network during the setup.
1. Install Control app on your device from App Store.
2. Launch Control app on your device. You should now be in the Interfaces tab, here click on the little + in the top right corner. Here you write http://dl.dropbox.com/u/11182094/unitycontrol.js and press submit. In the Interfaces tab you should now see Unity Controller in the bottom of the list.
3. Now go to the Destinations tab. Here you press the little + in the top right corner, and enter the IP Address of your computer. (If you dont know the IP of your computer you can Launch Radwin Island, and from the Main Menu go Options > Toggle iPod, the Options menu will expand and you will find one called Get your IP address.) Just leave Port at 10000. When you have entered the address, press Add and your IP should appear in the bottom of the list.
4. Select your destination to be your IP by tabbing your IP from the list under Destinations. 
5. Go to Interfaces tab and select Unity Controller
6. In Unity Controller you press Start which is found in the almost bottom of the screen.
7. Now you should be able to start Radwin Island go Options > Toggle iPod, and then start the game. The start button in Unity Controller should now write Connected.
            Enjoy 
Known issues
We have experienced issues that device and computer wont connect. A solution to this problem is: 
1. Shut down the game and the Control app (Control app is shut down by double tabbing home button on iDevice. If accessibility is on: find Control on list double tab on it holding the second tab for 3 seconds, the double tab Control to shut down. If accessibility is turned off: press and hold on Control tab and press the (-) sign by it when it appears)
2. Start up Control select destination (if you cannot see your already entered IP address press refresh in the top right just left of the + button). Go interfaces and select Unity Controller and press start
3. Now launch Radwin Island and it should be connected
